Two Rytec rigid high-speed spiral doors installed side by side in a parking structure, with red and green traffic control lights on the center jamb

Commercial & industrial · Orlando, Florida · Est. 2021

Doors that open in seconds, not minutes.

High-speed doors, loading dock equipment and HVLS fans for parking structures, distribution centers, food plants and manufacturing floors across Central Florida. Certified installers of Rytec, Renlita and EVO-Doors.

Get a project quote See the door lines
2021Est. in Orlando
60"Per second, open speed
3Certified installer programs
6Manufacturer lines carried

What we install and service

Five systems, one crew

If it moves and it is bolted to your building, it is ours. We do not sell one product line and bend every opening to fit it. The opening decides the door.

01

High-speed doors

Rigid aluminum spiral and fabric roll doors for openings that cycle all day. Faster cycles mean less conditioned air out the door and fewer vehicles waiting.

  • Rigid spiral, insulated slats
  • Fabric roll, single piece curtain
  • Vision sections on request
  • Traffic light and loop controls
02

Sectional & rolling steel

The workhorse doors. Insulated sectionals for dock positions, rolling steel where you need security and a small headroom envelope.

  • Insulated and non-insulated sections
  • Rolling steel service doors
  • Heavy-duty commercial spec
  • Operators, chain hoist to jackshaft
03

Loading dock equipment

Levelers, seals, shelters, bumpers, restraints and dock lights. Sold and installed as a package, because that is how a dock position actually works.

  • Hydraulic and mechanical levelers
  • Compression seals and head-curtain shelters
  • Laminated bumpers and wheel restraints
  • Dock lights and communication systems
04

Architectural & hydraulic openings

The openings that are part of the building rather than a hole in it. Counterweight and actuator-driven architectural panels, plus one-piece hydraulic and liftstrap bifold doors for spans a conventional door cannot cover.

  • Vertical lift, bifold and stacking panels
  • One-piece hydraulic, opens to a canopy
  • Liftstrap bifold, no cables or counterweights
  • Glass, aluminium and custom cladding
05

HVLS fans

High-volume, low-speed fans for warehouses and manufacturing floors. Moves the air a 20-foot ceiling traps, at a fraction of what the same comfort costs in tonnage.

  • Supply, install and commission
  • Controls and integration
  • Service and blade inspection
  • Paired with high-speed doors

Specialty doors

The door decides the line

We are not a one-catalog shop and we do not sub-contract the install. Six lines, sorted by the kind of opening you actually have. We are certified installers on Rytec, Renlita and EVO-Doors, direct dealers for Haas and ASTA, and the Central Florida dealer for QMI Qompact hurricane shutters.

Certified installer

High-speed doors

Rytec our main line

Rigid aluminum spiral and single-piece fabric roll doors for openings that cycle all day, where every second the door is open is conditioned air leaving and a vehicle waiting.

  • Rigid spiral, insulated double-walled slats
  • Fabric roll, single-piece curtain
  • Vision sections, traffic lights and loop controls
  • Up to 60 inches per second opening speed

Goes in: parking decks, distribution docks, food and beverage interiors, dealerships and exotic storage.

rytecdoors.com ↗
Certified installer

Architectural openings

Renlita & EVO-Doors Bonham, TX

When the opening is part of the architecture rather than a hole in a wall. Panels that lift, fold or stack away and leave a clean sightline, in glass, aluminium and custom cladding, with no interior protrusion.

  • S-Series counterweight, vertical lift and bifold
  • T-Series SkyStack horizontal stacking
  • EVO-Vue single panel, EVO-Wave bifold, both glazed
  • EVO-Flex gas-strut window, no power needed

Goes in: restaurants and breweries, bar tops and pass-throughs, hospitality, showrooms, civic buildings and high-end residential.

renlitausa.com ↗
Supplied & installed

Bifold & hydraulic

Schweiss big-span openings

One-piece hydraulic doors that swing up to become a canopy, and liftstrap bifold doors that lift upward instead of outward. No cables, pulleys or counterweights, which is fewer parts to service over the life of the door.

  • Liftstrap bifold, 29,000 lb rated straps
  • One-piece hydraulic, opens to an awning
  • Automatic latching systems
  • Insulation and weather seal packages

Goes in: aircraft hangars, fire stations, agricultural and equipment buildings, riding arenas, and any opening too wide for a conventional door.

bifold.com ↗
Direct dealer

Sectional doors

Haas Door Wauseon, OH

The workhorse. Insulated and non-insulated sectionals for dock positions and drive-through bays, built in Ohio, in a range of thicknesses, surface treatments, colours and window options rather than one catalogue door in one colour.

  • Commercial Aluminum and Insulated Aluminum 5000
  • Insulated Steel 800, 700 and 600 Series
  • 2400 Series and smooth ribbed steel
  • American Tradition 9000 Series

Goes in: loading dock positions, warehouse and shop bays, service buildings, anywhere a sectional is the right answer.

haasdoor.com ↗
Direct dealer

Rolling steel & fire doors

ASTA America Cartersville, GA

Where you need security, a small headroom envelope, or a rated assembly. Rolling steel service doors, sheet doors, counter shutters and UL rated fire doors, made in Georgia since 1990.

  • Industrial and insulated service doors
  • Commercial sheet doors and counter shutters
  • UL rated fire doors, 3/4, 1 1/2, 3 and 4 hour
  • Self storage sheet doors

Goes in: tight-headroom openings, secure storage, counter service windows, and anywhere the drawings call for a fire rating.

astaamerica.com ↗
Dealer · Central Florida

Hurricane shutters

QMI Qompact rolling shutters

Rolling storm shutters that disappear when you do not need them. The Qompact uses a patented nesting slat that coils tighter than a conventional shutter, which shrinks the box above the opening by roughly half and keeps it off the face of the building.

  • Smallest shutter box in the category
  • Up to 19 ft 8 in wide, up to 24 ft high
  • 15 ft of height into an 8 in box
  • Hinge designed against water and sand ingress

Goes on: storefronts and restaurant openings, balconies and lanais, hospitality, and any glass a building owner wants covered before a storm.

qmiusa.com ↗

Certified installer applies to Rytec, Renlita and EVO-Doors. Direct dealer applies to Haas and ASTA America. QMI Qompact is carried as a Central Florida dealer. Product details above come from each manufacturer's own published material; the specification for your opening is confirmed in writing before anything is ordered.

Loading dock

A dock position is six things, not one

Replacing a leveler and leaving a torn seal in place buys you a month. We quote the position, not the part, then tell you which pieces can wait a season and which cannot.

  • 01
    Dock levelerHydraulic, mechanical or air. Sized to your trailer mix and the grade of your approach.
  • 02
    Seal or shelterCompression seals for consistent trailers, head-curtain shelters where the fleet varies.
  • 03
    BumpersLaminated or steel-faced. The cheapest part on the dock and the one that saves the wall.
  • 04
    Vehicle restraintHook or wheel style, interlocked with your light system so nobody pulls off a loaded dock.
  • 05
    DoorInsulated sectional in most cases. High-speed where the position runs hot all day.
  • 06
    Lights and communicationDock light, interior and exterior signal lights, and the control that ties them together.
Interior row of loading dock positions with hydraulic levelers, compression seals and yellow bumpers

Parts counter

Parts counter

High-speed door spares, dock hardware and standard sectional parts. If your maintenance team turns wrenches, buy the part. If it is a controls fault or a spring, call us.

⚠ Build a list of what you need and send it over. We confirm price and availability against your actual door before anything is ordered.

Bottom bar safety edge

Reversing edge for rigid spiral and fabric roll doors. Cut to width.

Quote

Photo eye pair, through-beam

Transmitter and receiver, brackets included. Works on most operators.

Quote

Spiral drum wheel

Replacement drum wheel for rigid spiral doors. Sold each, order two.

Quote

Control panel, 3-button station

Open, close, stop. NEMA 4X enclosure for washdown areas.

Quote

Laminated dock bumper 10 x 14 x 4

Standard replacement bumper. Anchors sold separately.

Quote

Dock seal set, head and side pads

Compression seal for a 9 x 10 opening. Vinyl face, foam core.

Quote

Dock leveler lip assembly

Replacement lip for mechanical levelers. Specify make and width.

Quote

Dock light, 40 in arm

LED head, spring-loaded arm, wall mount bracket included.

Quote

Torsion spring, commercial

Wound to your door weight and drum size. Give us the numbers off the cone.

Quote

13-ball nylon rollers, set of 10

4 inch stem. Quieter and longer lived than the steel roller they replace.

Quote

Bottom weather seal, per foot

T-style astragal for standard retainer. Cut to your door width.

Quote

Lift cable set

Galvanized aircraft cable, pair, swaged ends. Specify door height.

Quote

Planned maintenance

Service agreements

A high-speed door in a busy dock does more cycles in a month than a house door does in five years. Planned maintenance is cheaper than the breakdown it prevents, and it is the only way to keep a manufacturer warranty intact.

Annual

One visit a year. Right for low-cycle openings and back-of-house doors.

By quote priced per door, per year
  • Full mechanical inspection
  • Lubrication and fastener check
  • Safety edge and photo eye test
  • Written condition report
  • Priority scheduling on repairs
Ask about annual

Quarterly

Four visits. The right interval for dock positions and garage entries that run all day.

By quote priced per door, per year
  • Everything in Annual, four times
  • Curtain and slat wear tracking
  • Operator and controls diagnostics
  • Wear parts replaced on schedule
  • Priority scheduling
  • Parts discount on the counter
Ask about quarterly

Full coverage

Monthly attention plus labor included. For plants where a door down stops the line.

By quote priced per door, per year
  • Monthly inspection cycle
  • All service labor included
  • Priority scheduling, first call
  • Managed spare parts on your shelf
  • Annual compliance documentation
  • One point of contact
Ask about coverage

Meet the team

The people who show up

Small crew, all of them on the tools. You get the same names on the second visit that you got on the first.

DR

Dustin Rouis

Owner
BM

Brodreich Mosher

Service manager
OM

Obed Martinez

Technician
BE

Brandon Evans

Technician
WT

Willie Traylor

Technician
Two white rigid spiral doors installed in a modern building with black storefront framing

About us

Taking care of all your door needs

That line is on our logo, and it is the whole job description. Superior Industry Solutions started in 2021 and works out of Orlando on commercial and industrial buildings across Florida.

What we actually spend our days on is high-speed doors. Parking structures, distribution centers, food and beverage plants, dealerships and high-rise garages. Alongside them, the loading dock equipment behind the door and the HVLS fans over the floor, because those three things fail together and it is better if one company owns all of them.

We are not a call center with a truck roster. There are five of us, the owner still runs jobs, and the phone gets answered by somebody who knows what a drum wheel costs.

Start a project Call (855) 407-3667

Questions we get

FAQ

How fast is a high-speed door, really?

A standard rigid spiral opens at up to 60 inches per second. A conventional sectional does around 8. On an opening that cycles 300 times a day, that difference is hours of open door time, which is conditioned air, insects, and drivers waiting.

Which manufacturer will you put in my opening?

Whichever one the opening calls for. Rytec for anything that cycles all day, Renlita and EVO-Doors where the opening is part of the architecture, Schweiss where the span is too wide for a conventional door, Haas for sectionals and ASTA for rolling steel and fire doors. We are certified installers on Rytec, Renlita and EVO-Doors, and direct dealers for Haas and ASTA. We will tell you why we picked the one we picked.

Can you work on a door another company installed?

Yes. Most of our service work is on doors we did not install. Send a photo of the data plate on the header and we can usually tell you what it needs before we come out.

What does a dock position cost to bring back to standard?

It depends on which of the six pieces are gone. A bumper is cheap. A leveler is not. We quote the position and tell you what can wait a season, so you can spread the work across a budget year instead of doing it all at once.

Do you handle the permit?

We provide the manufacturer documentation that goes with the permit application, and we make sure the door that arrives matches what was submitted. On new construction the general contractor usually pulls the permit itself.

Do you do residential garage doors?

Our work is commercial and industrial. If you are a homeowner we are happy to point you at somebody who does houses all day.

Do you run a 24 hour emergency line?

No. We are not going to advertise a number nobody answers at two in the morning. Call or text the office line and we will tell you honestly when we can be there. Service agreement customers get scheduled first.

Get a project quote

Tell us about the opening

The more you can tell us about the door count, the sizes and where the building is, the closer the first number will be. Photos help more than anything else.

Thanks, that is on its way. We read every one of these and we will come back to you with questions about the opening before we quote it.

Goes to quotes@superiorindustrysolutions.com. Prefer to talk? Call or text (855) 407-3667.

Quote list 0